% \LaTeX-Main\
%% The LaTeX package csvsimple - version 1.06 (2012/11/08)
%% csvsimple.sty: Simple LaTeX CSV file processing
%%
%% -------------------------------------------------------------------------------------------
%% Copyright (c) 2008-2012 by Prof. Dr. Dr. Thomas F. Sturm <thomas dot sturm at unibw dot de>
%% -------------------------------------------------------------------------------------------
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%%   http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2005/12/01 or later.
%%
%% This work has the LPPL maintenance status `author-maintained'.
%%
%% This work consists of all files listed in README
%%
\documentclass[a4paper,11pt]{ltxdoc}

\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage[english]{babel}
\usepackage{lmodern,parskip,array,ifthen,calc,makeidx}
\usepackage{amsmath,amssymb}
\usepackage[svgnames,table,hyperref]{xcolor}
\usepackage{tikz}
\usepackage[pdftex,bookmarks,raiselinks,pageanchor,hyperindex,colorlinks]{hyperref}
\urlstyle{sf}

\usepackage[a4paper,left=2.5cm,right=2.5cm,top=1.5cm,bottom=1.5cm,
    marginparsep=5mm,marginparwidth=10mm,
    headheight=0mm,headsep=0cm,
    footskip=1.5cm,includeheadfoot]{geometry}
\usepackage{fancyhdr}
\fancyhf{}
\fancyfoot[C]{\thepage}%
\renewcommand{\headrulewidth}{0pt}
\renewcommand{\footrulewidth}{0pt}
\pagestyle{fancy}
\tolerance=2000%
\setlength{\emergencystretch}{20pt}%

\RequirePackage{csquotes}
\RequirePackage[style=numeric-comp,sorting=nyt,
  maxnames=8,minnames=8,abbreviate=false,backend=biber]{biblatex}
\DeclareFieldFormat{url}{\newline\url{#1}}%
\DeclareListFormat{language}{}%
\setlength{\bibitemsep}{\smallskipamount}
\addbibresource{\jobname.bib}

\usepackage[documentation]{tcolorbox}
\usepackage{longtable}
\usepackage{csvsimple}

\tcbmakedocSubKey{docCsvKey}{csv}

\newcommand{\csvlisting}[1]{%
  \tcbinputlisting{docexample,listing style=tcbdocumentation,
  listing only,title={CSV file \texttt{#1.csv}},listing file=#1.csv}}

\makeatletter
\newcommand{\auxCommand}[1]{\disp@com{\cs{#1}}\index@Com{#1}}
\makeatother

\hypersetup{
  pdftitle={Manual for the csvsimple package},
  pdfauthor={Thomas F. Sturm},
  pdfsubject={csv file processing with LaTeX},
  pdfkeywords={csv file, comma separated values, key value syntax}
}

\def\version{1.06}%
\def\datum{2012/11/08}%
\makeindex


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
\begin{center}
\vspace*{5mm}\par
{\bfseries\LARGE The \texttt{csvsimple} package\par}
{\large Version \version\ (\datum)\par}\bigskip
{\large Thomas F.~Sturm%
  \footnote{Prof.~Dr.~Dr.~Thomas F.~Sturm, Institut f\"{u}r Mathematik und Informatik,
    Universit\"{a}t der Bundeswehr M\"{u}nchen, D-85577 Neubiberg, Germany;
     email: \href{mailto:thomas.sturm@unibw.de}{thomas.sturm@unibw.de}} }
\end{center}
\bigskip
\begin{absquote}
  \begin{center}\bfseries Abstract\end{center}
  |csvsimple| provides a simple \LaTeX\ interface for the processing of files with
  comma separated values (CSV). |csvsimple| relies heavily on the key value
  syntax from |pgfkeys| which results (hopefully) in an easy way of usage.
  Filtering and table generation is especially supported. Since the package
  is considered as a lightweight tool, there is no support for data sorting
  or data base storage.
\end{absquote}

\tableofcontents


\section{Introduction}%
The |csvsimple| package is applied to the processing of
CSV\footnote{CSV file: file with comma separated values.} files.
This processing is controlled by key value assignments according to the
syntax of |pgfkeys| \cite{tantau:2010c}. Sample applications of the package
are tabular lists, serial letters, and charts.

An alternative to |csvsimple| is the |datatool| package \cite{talbot:2012a}
which provides considerably more functions like exchange of separator and
delimiter symbols or sorting of data.
|csvsimple| has a different approach for the user interface and
is deliberately restricted to some basic functions with fast
processing speed.


\subsection{Loading the Package}
The package |csvsimple| loads the packages
|pgfkeys| \cite{tantau:2010c} and |ifthen| \cite{carlisle:2001b}.
|csvsimple| itself is loaded in the usual manner in the preamble:
\begin{dispListing}
\usepackage{csvsimple}
\end{dispListing}


\subsection{First Steps}
Every line of a processable CSV file has to contain an identical amount of
comma separated values. The curly braces |{}| of \TeX\ groups can be used
to mask a block which may contain commas not to be processed as separators.

The first line of such a CSV file is usually but not necessarily a header line
which contains the identifiers for each column.

%-- file embedded for simplicity --
\begin{tcbverbatimwrite}{grade.csv}
name,givenname,matriculation,gender,grade
Maier,Hans,12345,m,1.0
Huber,Anna,23456,f,2.3
Wei\ss{}b\"{a}ck,Werner,34567,m,5.0
\end{tcbverbatimwrite}
%-- end embedded file --

\csvlisting{grade}

The most simple way to display a CSV file in tabular form is the processing
with the \refCom{csvautotabular} command.

\begin{dispExample}
\csvautotabular{grade.csv}
\end{dispExample}

Typically, one would use \refCom{csvreader} instead of |\csvautotabular| to
gain full control over the interpretation of the included data.

In the following example, the entries of the header line are automatically
assigned to \TeX\ macros which may be used deliberately.

\begin{dispExample}
\begin{tabular}{|l|c|}\hline%
\bfseries Person & \bfseries Matr.~No.
\csvreader[head to column names]{grade.csv}{}%
{\\\givenname\ \name & \matriculation}%
  \\\hline
\end{tabular}
\end{dispExample}

\newpage
|\csvreader| is controlled by a plenty of options. For example, for table
applications line breaks are easily inserted by
\refKey{/csv/late after line}. This defines a macro execution just before
the following line.
Additionally, the assignment of columns to \TeX\ macros is shown in a non automated
way.

\begin{dispExample}
\begin{tabular}{|r|l|c|}\hline%
& Person & Matr.~No.\\\hline\hline
\csvreader[late after line=\\\hline]%
  {grade.csv}{name=\name,givenname=\firstname,matriculation=\matnumber}%
  {\thecsvrow & \firstname~\name & \matnumber}%
\end{tabular}
\end{dispExample}

An even more comfortable way to create a table is setting
appropriate option keys. Note, that this gives you the possibility to create a
|pgfkeys| style which contains the whole table creation.

\begin{dispExample}
\csvreader[tabular=|r|l|c|,
    table head=\hline & Person & Matr.~No.\\\hline\hline,
    late after line=\\\hline]%
  {grade.csv}{name=\name,givenname=\firstname,matriculation=\matnumber}%
  {\thecsvrow & \firstname~\name & \matnumber}%
\end{dispExample}

The next example shows such a style definition with the convenience macro
\refCom{csvstyle}. Here, we see again the automated assignment of header
entries to column names by \refKey{/csv/head to column names}.
For this, the header entries have to be without spaces and special characters.
But you can always assign entries to canonical macro names by hand like in the examples
above.

\begin{dispExample}
\csvstyle{myTableStyle}{tabular=|r|l|c|,
    table head=\hline & Person & Matr.~No.\\\hline\hline,
    late after line=\\\hline,
    head to column names}

\csvreader[myTableStyle]{grade.csv}{}%
  {\thecsvrow & \givenname~\name & \matriculation}%
\end{dispExample}

\newpage
Another way to address columns is to use their roman numbers.
The direct addressing is done by |\csvcoli|, |\csvcolii|, |\csvcoliii|, \ldots:

\begin{dispExample}
\csvreader[tabular=|r|l|c|,
    table head=\hline & Person & Matr.~No.\\\hline\hline,
    late after line=\\\hline]%
  {grade.csv}{}%
  {\thecsvrow & \csvcolii~\csvcoli & \csvcoliii}%
\end{dispExample}

And yet another method to assign macros to columns is to use arabic numbers
for the assignment:

\begin{dispExample}
\csvreader[tabular=|r|l|c|,
    table head=\hline & Person & Matr.~No.\\\hline\hline,
    late after line=\\\hline]%
  {grade.csv}{1=\name,2=\firstname,3=\matnumber}%
  {\thecsvrow & \firstname~\name & \matnumber}%
\end{dispExample}

For recurring applications, the |pgfkeys| syntax allows to create own styles
for a consistent and centralized design. The following example is easily
modified to obtain more or less option settings.

\begin{dispExample}
\csvset{myStudentList/.style={%
  tabular=|r|l|c|,
  table head=\hline & Person & #1\\\hline\hline,
  late after line=\\\hline,
  column names={name=\name,givenname=\firstname}
  }}

\csvreader[myStudentList={Matr.~No.}]{grade.csv}{matriculation=\matnumber}%
{\thecsvrow & \firstname~\name & \matnumber}%
\hfill%
\csvreader[myStudentList={Grade}]{grade.csv}{grade=\grade}%
{\thecsvrow & \firstname~\name & \grade}%
\end{dispExample}

\newpage
Alternatively, column names can be set by \refCom{csvnames}
and style definitions by \refCom{csvstyle}.
With this, the last example is rewritten as follows:

\begin{dispExample}
\csvnames{myNames}{1=\name,2=\firstname,3=\matnumber,5=\grade}
\csvstyle{myStudentList}{tabular=|r|l|c|,
  table head=\hline & Person & #1\\\hline\hline,
  late after line=\\\hline, myNames}

\csvreader[myStudentList={Matr.~No.}]{grade.csv}{}%
{\thecsvrow & \firstname~\name & \matnumber}%
\hfill%
\csvreader[myStudentList={Grade}]{grade.csv}{}%
{\thecsvrow & \firstname~\name & \grade}%
\end{dispExample}

The data lines of a CSV file can also be filtered. In the following example,
a certificate is printed only for students with grade unequal to 5.0.

\begin{dispExample}
\csvreader[filter not equal={\grade}{5.0}]%
  {grade.csv}{1=\name,2=\firstname,3=\matnumber,4=\gender,5=\grade}%
  {\begin{center}\Large\bfseries Certificate in Mathematics\end{center}
  \large\ifthenelse{\equal{\gender}{f}}{Ms.}{Mr.}
  \firstname~\name, matriculation number \matnumber, has passed the test
  in mathematics with grade \grade.\par\ldots\par
  }%
\end{dispExample}


\clearpage
\section{Macros for the Processing of CSV Files}\label{sec:makros}%

\begin{docCommand}{csvreader}{\oarg{options}\marg{file name}\marg{assignments}\marg{command list}}
  |\csvreader| reads the file denoted by \meta{file name} line by line.
  Every line of the file has to contain an identical amount of
  comma separated values. The curly braces |{}| of \TeX\ groups can be used
  to mask a block which may contain commas not to be processed as separators.\smallskip

  The first line of such a CSV file is by default but not necessarily
  processed as a header line which contains the identifiers for each column.
  The entries of this line can be used to give \meta{assignments} to \TeX\ macros
  to address the columns. The number of entries of this first line
  determines the accepted number of entries for all following lines.
  Every line which contains a higher or lower number of entries is ignored
  during standard processing.\smallskip

  The \meta{assignments} are given by key value pairs
  \mbox{\meta{name}|=|\meta{macro}}. Here, \meta{name} is an entry from the
  header line \emph{or} the arabic number of the addressed column.
  \meta{macro} is some \TeX\ macro which gets the content of the addressed column.\smallskip

  The \meta{command list} is executed for every accepted data line. Inside the
  \meta{command list} is applicable:
  \begin{itemize}
  \item \auxCommand{thecsvrow} or the counter |csvrow| which contains the number of the
    current data line (starting with 1).
  \item \auxCommand{csvcoli}, \auxCommand{csvcolii}, \auxCommand{csvcoliii}, \ldots,
    which contain the contents of the column entries of the current data line.
    Alternatively can be used:
  \item \meta{macro} from the \meta{assignments} to have a logical
    addressing of a column entry.
  \end{itemize}
  Note, that the \meta{command list} is allowed to contain |\par| and
  that all macro definitions are made global to be used for table applications.\smallskip

  The processing of the given CSV file can be controlled by various
  \meta{options} given as key value list. The feasible option keys
  are described in section \ref{sec:schluessel} from page \pageref{sec:schluessel}.

\begin{dispExample}
\csvreader[tabular=|r|l|l|, table head=\hline, late after line=\\,
           late after last line=\\\hline]{grade.csv}%
  {name=\name,givenname=\firstname,grade=\grade}%
  {\grade & \firstname~\name & \csvcoliii}
\end{dispExample}

Mainly, the |\csvreader| command consists of a \refCom{csvloop} macro with
following parameters:\par
|\csvloop{|\meta{options}|, file=|\meta{file name}|, column names=|\meta{assignments}|,|\\
  \hspace*{2cm} |command=|\meta{command list}|}|\par
  Therefore, the application of the keys \refKey{/csv/file} and \refKey{/csv/command}
is useless for |\csvreader|.
\end{docCommand}

\begin{docCommand}{csvloop}{\marg{options}}
  Usually, \refCom{csvreader} may be preferred instead of |\csvloop|.
  \refCom{csvreader} is based on |\csvloop| which takes a mandatory list of
  \meta{options} in key value syntax.
  This list of \meta{options} controls the total processing. Especially,
  it has to contain the CSV file name.
\begin{dispExample}
\csvloop{file={grade.csv}, column names={name=\name}, command=\name,
  before reading={List of students:\ },
  late after line={{,}\ }, late after last line=.}
\end{dispExample}
\end{docCommand}

\clearpage
\begin{docCommand}{csvautotabular}{\oarg{options}\marg{file name}}
  |\csvautotabular| is an abbreviation for the application of the option key
  \refKey{/csv/autotabular} together with other \meta{options} to \refCom{csvloop}.
  This macro reads the whole CSV file denoted by \meta{file name}
  with an automated formatting.
\begin{dispExample}
\csvautotabular{grade.csv}
\end{dispExample}
\begin{dispExample}
\csvautotabular[filter equal={\csvcoliv}{f}]{grade.csv}
\end{dispExample}
\end{docCommand}


\begin{docCommand}{csvautolongtable}{\oarg{options}\marg{file name}}
  |csvautolongtable| is an abbreviation for the application of the option key
  \refKey{/csv/autolongtable} together with other \meta{options} to \refCom{csvloop}.
  This macro reads the whole CSV file denoted by \meta{file name}
  with an automated formatting.
  For application, the package |longtable| is required which has to be
  loaded in the preamble.
\begin{dispListing}
\csvautolongtable{grade.csv}
\end{dispListing}
\csvautolongtable{grade.csv}
\end{docCommand}


\clearpage

\begin{docCommand}{csvset}{\marg{options}}
  Sets \meta{options} for every following
  \refCom{csvreader} and \refCom{csvloop}. For example, this command may
  be used for style definitions.
\begin{dispExample}
\csvset{grade list/.style=
    {column names={name=\name,givenname=\firstname,grade=\grade}},
  passed/.style={filter not equal={\grade}{5.0}} }

The following students passed the test in mathematics:
\csvreader[grade list,passed]{grade.csv}{}{\firstname\ \name\ (\grade); }%
\end{dispExample}
\end{docCommand}


\begin{docCommand}{csvstyle}{\marg{Stilname}\marg{options}}
  Abbreviation for |\csvset{|\meta{style name}|/.style=|\marg{options}|}|
  to define a new style.
\end{docCommand}

\begin{docCommand}{csvnames}{\marg{Stilname}\marg{Zuweisungsliste}}
  Abbreviation for |\csvset{|\meta{style name}|/.style={column names=|\marg{assignments}|}}|
  to define additional \meta{assignments} of macros to columns.
\begin{dispExample}
\csvnames{grade list}{name=\name,givenname=\firstname,grade=\grade}
\csvstyle{passed}{filter not equal={\grade}{5.0}}

The following students passed the test in mathematics:
\csvreader[grade list,passed]{grade.csv}{}{\firstname\ \name\ (\grade); }%
\end{dispExample}
\end{docCommand}


\begin{docCommand}{csvheadset}{\marg{assignments}}
  For some special cases, this command can be used to change the
  \meta{assignments} of macros to columns during execution of
  \refCom{csvreader} and \refCom{csvloop}.
\begin{dispExample}
\csvreader{grade.csv}{}%
  { \csvheadset{name=\n} \fbox{\n}
    \csvheadset{givenname=\n} \ldots\ \fbox{\n}  }%
\end{dispExample}
\end{docCommand}

\clearpage

\begin{docCommand}{csviffirstrow}{\marg{then macros}\marg{else macros}}
  Inside the command list of \refCom{csvreader}, the \meta{then macros}
  are executed for the first data line, and the \meta{else macros}
  are executed for all following lines.
\begin{dispExample}
\csvreader[tabbing, head to column names, table head=\hspace*{3cm}\=\kill]%
  {grade.csv}{}%
  {\givenname~\name \> (\csviffirstrow{first entry!!}{following entry})}
\end{dispExample}
\end{docCommand}


\begin{docCommand}{csvifoddrow}{\marg{then macros}\marg{else macros}}
  Inside the command list of \refCom{csvreader}, the \meta{then macros}
  are executed for odd-numbered   data lines, and the \meta{else macros}
  are executed for even-numbered lines.
\begin{dispExample}
\csvreader[head to column names,tabular=|l|l|l|l|,
  table head=\hline\bfseries \# & \bfseries Name & \bfseries Grade\\\hline,
  late after line=\\, late after last line=\\\hline]{grade.csv}{}{%
    \csvifoddrow{\slshape\thecsvrow & \slshape\name, \givenname & \slshape\grade}%
    {\bfseries\thecsvrow & \bfseries\name, \givenname & \bfseries\grade}}
\end{dispExample}

The |\csvifoddrow| macro may be used for striped tables:

\begin{dispExample}
% This example needs the xcolor package
\csvreader[head to column names,tabular=rlcc,
  table head=\hline\rowcolor{red!50!black}\color{white}\# & \color{white}Person
    & \color{white}Matr.~No. & \color{white}Grade,
  late after head=\\\hline\rowcolor{yellow!50},
  late after line=\csvifoddrow{\\\rowcolor{yellow!50}}{\\\rowcolor{red!25}}]%
  {grade.csv}{}%
  {\thecsvrow & \givenname~\name & \matriculation & \grade}%
\end{dispExample}

Alternatively, |\rowcolors| from the |xcolor| package can be used for this
purpose:

\begin{dispExample}
% This example needs the xcolor package
\csvreader[tabular=rlcc, before table=\rowcolors{2}{red!25}{yellow!50},
  table head=\hline\rowcolor{red!50!black}\color{white}\# & \color{white}Person
    & \color{white}Matr.~No. & \color{white}Grade\\\hline,
  late after line=\\,head to column names]{grade.csv}{}%
  {\thecsvrow & \givenname~\name & \matriculation & \grade}%
\end{dispExample}
\end{docCommand}

\clearpage

\begin{docCommand}{csvfilteraccept}{}
  All following consistent data lines will be accepted and processed.
  This command overwrites all previous filter settings and may be used
  inside \refKey{/csv/before filter} to implement
  an own filtering rule together with |\csvfilterreject|.
\begin{dispExample}
\csvreader[autotabular,
  before filter=\ifthenelse{\equal{\csvcoliv}{m}}{\csvfilteraccept}{\csvfilterreject}
  ]{grade.csv}{}{\csvlinetotablerow}%
\end{dispExample}
\end{docCommand}


\begin{docCommand}{csvfilterreject}{}
  All following data lines will be ignored.
  This command overwrites all previous filter settings.
\end{docCommand}


\begin{docCommand}{csvline}{}
  This macro contains the current and unprocessed data line.
\begin{dispExample}
\csvreader[no head, tabbing, table head=\textit{line XX:}\=\kill]%
  {grade.csv}{}{\textit{line \thecsvrow:} \> \csvline}%
\end{dispExample}
\end{docCommand}


\begin{docCommand}{thecsvrow}{}
  Typesets the current data line number. This is the
  current number of accepted data lines without the header line.
  The \LaTeX\ counter |csvrow| can be addressed directly in the usual way,
  e.\,g. by |\roman{csvrow}|.
\end{docCommand}


\begin{docCommand}{thecsvinputline}{}
  Typesets the current file line number. This is the
  current number of all data lines including the header line.
  The \LaTeX\ counter |csvinputline| can be addressed directly in the usual way,
  e.\,g. by |\roman{csvinputline}|.
\begin{dispExample}
\csvreader[no head, filter equal={\thecsvinputline}{3}]%
  {grade.csv}{}%
  {The line with number \thecsvinputline\ contains: \csvline}%
\end{dispExample}
\end{docCommand}


\begin{docCommand}{csvlinetotablerow}{}
  Typesets the current processed data line with |&| between the entries.
  Most users will never apply this command.
\end{docCommand}



\clearpage
\section{Option Keys}\label{sec:schluessel}%
For the \meta{options} in \refCom{csvreader} respectively \refCom{csvloop}
the following |pgf| keys can be applied. The key tree path |/csv/| is not
to be used inside these macros.


\subsection{Command Definition}%--------%[[

\begin{docCsvKey}{before reading}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed before the CSV file is processed.
\end{docCsvKey}

\begin{docCsvKey}{after head}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after the header line is read.
\end{docCsvKey}

\begin{docCsvKey}{before filter}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after reading and consistency checking
  of a data line. They are executed before any filter condition is checked,
  see \refKey{/csv/filter}.
\end{docCsvKey}

\begin{docCsvKey}{late after head}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after reading and disassembling
  of the first accepted data line. They are executed before further processing
  of this line.
\end{docCsvKey}

\begin{docCsvKey}{late after line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after reading and disassembling
  of the next accepted data line (after \refKey{/csv/before filter}).
  They are executed before further processing of this next line.
  |late after line| overwrites |late after first line| and |late after last line|.
\end{docCsvKey}


\begin{docCsvKey}{late after first line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after reading and disassembling
  of the second accepted data line instead of \refKey{/csv/late after line}.
  This key has to be set after |late after line|.
\end{docCsvKey}


\begin{docCsvKey}{late after last line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after processing of the last
  accepted data line instead of \refKey{/csv/late after line}.
  This key has to be set after |late after line|.
\end{docCsvKey}


\begin{docCsvKey}{before line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after \refKey{/csv/late after line}
  and before \refKey{/csv/command}.
  |before line| overwrites |before first line|.
\end{docCsvKey}


\begin{docCsvKey}{before first line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed instead of \refKey{/csv/before line}
  for the first accepted data line.
  This key has to be set after |before line|.
\end{docCsvKey}


\begin{docCsvKey}{command}{=\meta{macros}}{no default, initially \cs{csvline}}
  Sets the \meta{macros} to be executed for every accepted data line.
  They are executed between \refKey{/csv/before line} and \refKey{/csv/after line}.
\end{docCsvKey}


\begin{docCsvKey}{after line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed for every accepted data line
  after \refKey{/csv/command}.
  |after line| overwrites |after first line|.
\end{docCsvKey}


\begin{docCsvKey}{after first line}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed instead of \refKey{/csv/after line}
  for the first accepted data line.
  This key has to be set after |after line|.
\end{docCsvKey}

\begin{docCsvKey}{after reading}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after the CSV file is processed.
\end{docCsvKey}


\begin{dispExample}
\csvreader[
  before reading        = \meta{before reading}\\,
  after head            = \meta{after head},
  before filter         = \\\meta{before filter},
  late after head       = \meta{late after head},
  late after line       = \meta{late after line},
  late after first line = \meta{late after first line},
  late after last line  = \\\meta{late after last line},
  before line           = \meta{before line},
  before first line     = \meta{before first line},
  after line            = \meta{after line},
  after first line      = \meta{after first line},
  after reading         = \\\meta{after reading}
    ]{grade.csv}{name=\name}{\textbf{\name}}%
\end{dispExample}

Additional command definition keys are provided for the supported tables,
see section \ref{subsec:tabsupport} from page
\pageref{subsec:tabsupport}.


\subsection{Header Processing and Column Name Assignment}%

\begin{docCsvKey}{head}{\colOpt{=\meta{boolean value}}}{default |true|, initially |true|}
  If this key is set, the first line of the CSV file is treated as a header
  line which can be used for column name assignments.
\end{docCsvKey}


\begin{docCsvKey}{no head}{}{no value}
  Abbreviation for |head=false|, i.\,e. the first line of the CSV file is
  treated as data line.
\end{docCsvKey}

\begin{docCsvKey}{column names}{=\meta{assignments}}{no default, initially empty}
  Adds some new \meta{assignments} of macros to columns in key value syntax.
  Existing assignments are kept.
\end{docCsvKey}


\begin{docCsvKey}{column names reset}{}{no value}
  Clears all assignments of macros to columns.
\end{docCsvKey}


\begin{docCsvKey}{head to column names}{\colOpt{=\meta{boolean value}}}{default |true|, initially |false|}
  If this key is set, the entries of the header line are used automatically
  as macro names for the columns. This option can be used only, if
  the header entries do not contain spaces and special characters to be
  used as feasible \LaTeX\ macro names.
\end{docCsvKey}


\clearpage
\subsection{Consistency Check and Filtering}%

\begin{docCsvKey}{check column count}{\colOpt{=\meta{boolean value}}}{default |true|, initially |true|}
  This key defines, if the number of entries in a data line is checked against
  an expected value.\\
  If |true|, every non consistent line is ignored without announcement.\\
  If |false|, every line is accepted and may produce an error during
  further processing.
\end{docCsvKey}


\begin{docCsvKey}{no check column count}{}{no value}
  Abbreviation for |check column count=false|.
\end{docCsvKey}


\begin{docCsvKey}{column count}{=\meta{number}}{no default}
  Sets the \meta{number} of feasible entries per data line.
  This setting is only useful in connection with \refKey{/csv/no head},
  since \meta{number} would be replaced by the number of entries in the
  header line otherwise.
\end{docCsvKey}


\begin{docCsvKey}{on column count error}{=\meta{macros}}{no default, initially empty}
  \meta{macros} to be executed for unfeasible data lines.
\end{docCsvKey}


\begin{docCsvKey}{warn on column count error}{}{style, no value}
  Display of a warning for unfeasible data lines.
\end{docCsvKey}


\begin{docCsvKey}{filter}{=\meta{condition}}{no default}
  Only data lines which fulfill a logical \meta{condition} are accepted.
  For the \meta{condition}, every term from the |ifthen| package \cite{carlisle:2001b}
  is feasible.
  To preprocess the data line before testing the \meta{condition},
  the option key \refKey{/csv/before filter} can be used.
\end{docCsvKey}

\begin{docCsvKey}{no filter}{}{no value, initially set}
  Clears a set filter.
\end{docCsvKey}


\begin{docCsvKey}{filter accept all}{}{no value, initially set}
  Alias for |no filter|. All consistent data lines are accepted.
\end{docCsvKey}


\begin{docCsvKey}{filter reject all}{}{no value}
  All data line are ignored.
\end{docCsvKey}


\begin{docCsvKey}{filter equal}{=\marg{string A}\marg{string B}}{style, no default}
  Only lines where \meta{string A} and \meta{string B} are equal after expansion
  are accepted.
\end{docCsvKey}


\begin{docCsvKey}{filter not equal}{=\marg{string A}\marg{string B}}{style, no default}
  Only lines where \meta{string A} and \meta{string B} are not equal after expansion
  are accepted.
\end{docCsvKey}


%]]


\clearpage
\subsection{Table Support}\label{subsec:tabsupport}%--------%[[

\begin{docCsvKey}{tabular}{=\meta{table format}}{style, no default}
  Surrounds the CSV processing with |\begin{tabular}|\marg{table format}
  at begin and with |\end{tabular}| at end.
Additionally, the commands defined by the key values of
  \refKey{/csv/before table}, \refKey{/csv/table head}, \refKey{/csv/table foot},
  and \refKey{/csv/after table} are executed at the appropriate places.
\end{docCsvKey}


\begin{docCsvKey}{centered tabular}{=\meta{table format}}{style, no default}
  Like \refKey{/csv/tabular} but inside an additional |center| environment.
\end{docCsvKey}


\begin{docCsvKey}{longtable}{=\meta{table format}}{style, no default}
  Like \refKey{/csv/tabular} but for the |longtable| environment.
  This requires the package |longtable| (not loaded automatically).
\end{docCsvKey}


\begin{docCsvKey}{tabbing}{}{style, no value}
  Like \refKey{/csv/tabular} but for the |tabbing| environment.
\end{docCsvKey}


\begin{docCsvKey}{centered tabbing}{}{style, no value}
  Like \refKey{/csv/tabbing} but inside an additional |center| environment.
\end{docCsvKey}


\begin{docCsvKey}{no table}{}{style, no value}
  Deactivates |tabular|, |longtable|, and |tabbing|.
\end{docCsvKey}


\begin{docCsvKey}{before table}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed before |\begin{tabular}| or before |\begin{longtable}|
  or before |\begin{tabbing}|, respectively.
\end{docCsvKey}


\begin{docCsvKey}{table head}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after |\begin{tabular}| or after |\begin{longtable}|
  or after |\begin{tabbing}|, respectively.
\end{docCsvKey}


\begin{docCsvKey}{table foot}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed before |\end{tabular}| or before |\end{longtable}|
  or before |\end{tabbing}|, respectively.
\end{docCsvKey}


\begin{docCsvKey}{after table}{=\meta{macros}}{no default, initially empty}
  Sets the \meta{macros} to be executed after |\end{tabular}| or after |\end{longtable}|
  or after |\end{tabbing}|, respectively.
\end{docCsvKey}


\begin{docCsvKey}{autotabular}{=\meta{file name}}{no default}
  Reads the whole CSV file denoted \meta{file name} with an automated formatting.
\end{docCsvKey}


\begin{docCsvKey}{autolongtable}{=\meta{file name}}{no default}
  Reads the whole CSV file denoted \meta{file name} with an automated formatting
  using the required |longtable| package.
\end{docCsvKey}


\clearpage
\subsection{Miscellaneous}%

\begin{docCsvKey}{every csv}{}{style, initially empty}
  A style definition which is used for every following CSV file.
  This definition can be overwritten with user code.
\begin{dispListing}
% Sets a warning message for unfeasible data lines.
\csvset{every csv/.style={warn on column count error}}
% Alternatively:
\csvstyle{every csv}{warn on column count error}
\end{dispListing}
\end{docCsvKey}

\begin{docCsvKey}{default}{}{style}
  A style definition which is used for every following CSV file which
  resets all settings to default values\footnote{\texttt{default} is used
  because of the global nature of most settings.}.
  This key should not be used or changed by the user if there is not a
  really good reason (and you know what you do).
\end{docCsvKey}


\begin{docCsvKey}{file}{=\meta{file name}}{no default, initially |unknown.csv|}
  Sets the \meta{file name} of the CSV file to be processed.
\end{docCsvKey}


\begin{docCsvKey}{preprocessed file}{=\meta{file name}}{no default, initially unused}
  Sets the \meta{file name} of the CSV file which is the output of a
  preprocessor.
\end{docCsvKey}


\begin{docCsvKey}{preprocessor}{=\meta{macro}}{no default}
  Defines a preprocessor for the given CSV file.
  The \meta{macro} has to have two mandatory arguments. The first argument
  is the original CSV file which is set by \refKey{/csv/file}.
  The second argument is the preprocessed CSV file
  which is set by \refKey{/csv/preprocessed file}.\par\smallskip
  Typically, the \meta{macro} may call an external program which preprocesses
  the original CSV file (e.\,g. sorting the file) and creates the
  preprocessed CSV file. The later file is used by \refCom{csvreader}
  or \refCom{csvloop}.
\begin{dispListing}
\newcommand{\mySortTool}[2]{%
  % call to an external program to sort file #1 with resulting file #2
}

\csvreader[%
  preprocessed file=\jobname_sorted.csv,
  preprocessor=\mySortTool,
  ]{some.csv}{}{%
  % do something
}
\end{dispListing}
\end{docCsvKey}


\begin{docCsvKey}{no preprocessing}{}{style, no value, initially set}
  Clears any preprocessing, i.\,e. preprocessing is switched of.
\end{docCsvKey}



\clearpage
\section{Examples}%

\subsection{A Serial Letter}%
In this example, a serial letter is to be written to all persons with
addresses from the following CSV file. Deliberately, the file content is
not given in very pretty format.

%-- file embedded for simplicity --
\begin{tcbverbatimwrite}{address.csv}
name,givenname,gender,degree,street,zip,location,bonus
Maier,Hans,m,,Am Bachweg 17,10010,Hopfingen,20
    % next line with a comma in curly braces
Huber,Erna,f,Dr.,{Moosstra\ss{}e 32, Hinterschlag},10020,\"{O}rtingstetten,30
Wei\ss{}b\"{a}ck,Werner,m,Prof. Dr.,Brauallee 10,10030,Klingenbach,40
    % this line is ignored %
  Siebener ,  Franz,m,   ,  Blaumeisenweg 12  , 10040 ,  Pardauz , 50
    % preceding and trailing spaces in entries are removed %
Schmitt,Anton,m,,{\AE{}lfred-Esplanade, T\ae{}g 37}, 10050,\OE{}resung,60
\end{tcbverbatimwrite}
%-- end embedded file --

\csvlisting{address}

Firstly, we survey the file content quickly using
|\csvautotabular|.
As can be seen, unfeasible lines are ignored automatically.

\begin{dispExample}
\tiny\csvautotabular{address.csv}
\end{dispExample}

Now, we create the serial letter where every feasible data line produces
an own page. Here, we simulate the page by a |tcolorbox| (from the package
|tcolorbox|).
For the gender specific salutations, an auxiliary macro |\ifmale| is
introduced.

\begin{dispExample}
% this example requires the tcolorbox package
\newcommand{\ifmale}[2]{\ifthenelse{\equal{\gender}{m}}{#1}{#2}}

\csvreader[head to column names]{address.csv}{}{%
\begin{tcolorbox}[colframe=DarkGray,colback=White,arc=0mm,width=(\linewidth-2pt)/2,
      equal height group=letter,before=,after=\hfill,fonttitle=\bfseries,
      adjusted title={Letter to \name}]
  \ifthenelse{\equal{\degree}{}}{\ifmale{Mr.}{Ms.}}{\degree}~\givenname~\name\\
  \street\\\zip~\location
  \tcblower
  {\itshape Dear \ifmale{Sir}{Madam},}\\
  we are pleased to announce you a bonus value of \bonus\%{}
  which will be delivered to \location\ soon.\\\ldots
\end{tcolorbox}}
\end{dispExample}



\clearpage
\subsection{A Graphical Presentation}%
For this example, we use some artificial statistical data given by a CSV file.

%-- file embedded for simplicity --
\begin{tcbverbatimwrite}{data.csv}
land,group,amount
Bayern,A,1700
Baden-W\"{u}rttemberg,A,2300
Sachsen,B,1520
Th\"{u}ringen,A,1900
Hessen,B,2100
\end{tcbverbatimwrite}
%-- end embedded file --

\csvlisting{data}

Firstly, we survey the file content using
|\csvautotabular|.

\begin{dispExample}
\csvautotabular{data.csv}
\end{dispExample}

The amount values are presented in the following diagram by bars where
the group classification is given using different colors.

\begin{dispExample}
% This example requires the package tikz
\begin{tikzpicture}[Group/A/.style={left color=red!10,right color=red!20},
                    Group/B/.style={left color=blue!10,right color=blue!20}]
\csvreader[head to column names]{data.csv}{}{%
  \begin{scope}[yshift=-\thecsvrow cm]
  \path [draw,Group/\group] (0,-0.45)
    rectangle node[font=\bfseries] {\amount} (\amount/1000,0.45);
  \node[left] at (0,0) {\land};
  \end{scope}  }
\end{tikzpicture}
\end{dispExample}

\clearpage
Next, we create a pie chart by calling |\csvreader| twice.
In the first step, the total sum of amounts is computed, and in the second
step the slices are drawn.

\begin{dispExample}
% Modified example from www.texample.net for pie charts
% This example needs the packages tikz, xcolor, calc
\definecolorseries{myseries}{rgb}{step}[rgb]{.95,.85,.55}{.17,.47,.37}
\resetcolorseries{myseries}%

% a pie slice
\newcommand{\slice}[4]{
  \pgfmathsetmacro{\midangle}{0.5*#1+0.5*#2}
  \begin{scope}
    \clip (0,0) -- (#1:1) arc (#1:#2:1) -- cycle;
    \colorlet{SliceColor}{myseries!!+}%
    \fill[inner color=SliceColor!30,outer color=SliceColor!60] (0,0) circle (1cm);
  \end{scope}
  \draw[thick] (0,0) -- (#1:1) arc (#1:#2:1) -- cycle;
  \node[label=\midangle:#4] at (\midangle:1) {};
  \pgfmathsetmacro{\temp}{min((#2-#1-10)/110*(-0.3),0)}
  \pgfmathsetmacro{\innerpos}{max(\temp,-0.5) + 0.8}
  \node at (\midangle:\innerpos) {#3};
}

% sum of amounts
\csvreader[before reading=\def\mysum{0}]{data.csv}{amount=\amount}{%
  \pgfmathsetmacro{\mysum}{\mysum+\amount}%
}

% drawing of the pie chart
\begin{tikzpicture}[scale=3]%
\def\mya{0}\def\myb{0}
\csvreader[head to column names]{data.csv}{}{%
  \let\mya\myb
  \pgfmathsetmacro{\myb}{\myb+\amount}
  \slice{\mya/\mysum*360}{\myb/\mysum*360}{\amount}{\land}
}
\end{tikzpicture}%
\end{dispExample}


\clearpage
Finally, the filter option is demonstrated by separating the groups A and B.
Every item is piled upon the appropriate stack.

\begin{dispExample}
\newcommand{\drawGroup}[2]{%
  \def\mya{0}\def\myb{0}
  \node[below=3mm] at (2.5,0) {\bfseries Group #1};
  \csvreader[head to column names,filter equal={\group}{#1}]{data.csv}{}{%
    \let\mya\myb
    \pgfmathsetmacro{\myb}{\myb+\amount}
    \path[draw,top color=#2!25,bottom color=#2!50]
      (0,\mya/1000) rectangle node{\land\ (\amount)} (5,\myb/1000);
}}

\begin{tikzpicture}
  \fill[gray!75] (-1,0) rectangle (13,-0.1);
  \drawGroup{A}{red}
  \begin{scope}[xshift=7cm]
  \drawGroup{B}{blue}
  \end{scope}
\end{tikzpicture}

\end{dispExample}


\clearpage
\subsection{Macro code inside the data}%

If needed, the data file may contain macro code. Note that the first character
of a data line is not allowed to be the backslash '|\|'.

%-- file embedded for simplicity --
\begin{tcbverbatimwrite}{macrodata.csv}
type,description,content
M,A nice \textbf{formula},         $\displaystyle \int\frac{1}{x} = \ln|x|+c$
G,A \textcolor{red}{colored} ball, {\tikz \shadedraw [shading=ball] (0,0) circle (.5cm);}
M,\textbf{Another} formula,        $\displaystyle \lim\limits_{n\to\infty} \frac{1}{n}=0$
\end{tcbverbatimwrite}
%-- end embedded file --

\csvlisting{macrodata}

Firstly, we survey the file content using
|\csvautotabular|.

\begin{dispExample}
\csvautotabular{macrodata.csv}
\end{dispExample}


\begin{dispExample}
\csvstyle{my enumerate}{head to column names,
  before reading=\begin{enumerate},after reading=\end{enumerate}}

\csvreader[my enumerate]{macrodata.csv}{}{%
  \item \description:\par\content}

\bigskip
Now, formulas only:
\csvreader[my enumerate,filter equal={\type}{M}]{macrodata.csv}{}{%
  \item \description:\qquad\content}
\end{dispExample}


% Actually, it is not a good idea to include the references like this!
% Do not follow this bad example ...
\begin{tcbverbatimwrite}{\jobname.bib}
@manual{tantau:2010c,
   author    = {Till Tantau},
   title     = {The TikZ and PGF Packages},
   subtitle  = {Manual for version 2.10},
   url       = {http://mirror.ctan.org/graphics/pgf/base/doc/generic/pgf/pgfmanual.pdf},
   date      = {2010-10-25},
}

@manual{carlisle:2001b,
   author    = {David Carlisle},
   title     = {The ifthen package},
   url       = {http://mirror.ctan.org/macros/latex/base/},
   Xnote      = {},
   day       = 26,
   month     = may,
   year      = 2001,
   language  = {english}
}

@manual{talbot:2012a,
  author    = {Nicola L. C. Talbot},
  title     = {datatool v 2.11: Databases and data manipulation},
  url       = {http://mirror.ctan.org/macros/latex/contrib/datatool/datatool.pdf},
  date      = {2012-09-25},
}
\end{tcbverbatimwrite}


\printbibliography[heading=bibintoc]

\printindex

\end{document}